Immigrate to Canada as a small engine and small equipment repairer

Immigrate to Canada as a small engine and small equipment repairer in 2023

If you have experience as a small engine and small equipment repairer then you are in luck. Your skills are wanted in Canada and you can Immigrate via the Federal Skilled Work Visa, The Federal Skilled Trades Visa, on the Canada Experience Class pathway or on a Provincial Nominee Program.

Other small engine and small equipment repairers are on the Canadian National Occupations Classification (NOC) List under the code of 7335 and are eligible to move to Canada. Despite many Other small engine and small equipment repairers migrating to Canada over the past few years, Other small engine and small equipment repairers are still in high demand across Canada from both a National and Provincial basis.

Canada recognizes that in other countries Other small engine and small equipment repairers are employed under different job titles and positions.  Therefore, Canada will class you as Other small engine and small equipment repairers  if your current job title is that of:

• Air-cooled engine mechanic

• Apprentice small engine mechanic

• Garden tractor repairer

• Gasoline-powered lawn mower mechanic

• Gasoline-powered lawn mower repairer

• Gasoline-powered snow blower repairer

• Gas-powered small equipment mechanic

• Lawn and garden equipment technician

• Outdoor power equipment technician

• Small engine and equipment mechanic

• Small engine mechanic

• Small engine repairer

• Small engine technician

• Small equipment mechanic apprentice

• Small equipment repairer

• .

• .

• .

• .

• .

• .

• .

• .

• .

• .

• .

• .

• .

• .

• .

• .

• .

• .

• .

• .

• .

• Production co-ordinator – radiobroadcasting

• Production co-ordinator – video games

To Immigrate to Canada as a small engine and small equipment repairer your day to day duties and responsibilities in your current job must be:

• Review work orders and discuss work to be performed with supervisor

• Inspect and test engines and other mechanical components using test devices to diagnose and isolate faults

• Adjust repair or replace mechanical or electrical system parts and components using hand tools and equipment

• Test and adjust repaired equipment for proper performance

• Perform scheduled maintenance service on equipment

• Advise customers on work performed and general condition of equipment

• Determine estimates of repair cost.

• .

• Make-up artists

• Apply cosmetic and special effects make-up on actors and other performers.

You must have these minimum qualifications to immigrate to Canada as a small engine and small equipment repairer

• Completion of secondary school and training courses or a vocational program is usually required.

• Completion of a three- to four-year apprenticeship program in small engine or equipment repair or a combination of several years of work experience and high school or college courses in small engine or equipment repair are usually required for trade certification.

• Small engine or equipment mechanic trade certification is available but voluntary in Newfoundland and Labrador Prince Edward Island New Brunswick Ontario and Nunavut.

• Inboard/outboard mechanic trade certification is available but voluntary in Ontario and British Columbia.

• Outdoor power equipment technician trade certification for specified types of equipment is available but voluntary in Manitoba Alberta British Columbia the Yukon the Northwest Territories and Nunavut.

• .

• .

Minimum work experience required to migrate to Canada as a small engine and small equipment repairer

You will be expected to have at least 1 year (1,560 hours total / 30 hours + per week), continuous full-time employment as a small engine and small equipment repairer or part time equivalent within the last 10 years.

Getting your Other small engine and small equipment repairer qualifications credentialed for Immigrating to Canada

An Educational Credential Assessment (ECA) is a report that evaluates your educational credentials as a small engine and small equipment repairer and confirms if your education is equivalent to a completed Canadian degree, diploma, or certificate.. Here is a step-by-step guide to getting an ECA for Canada as a small engine and small equipment repairer.

Step 1: Choose a designated ECA organization for your Other small engine and small equipment repairer qualifications

Firstly, you need to choose a designated organization that is authorized by the Canadian government to provide ECAs. The designated organizations are:

Comparative Education Service (CES)

International Credential Assessment Service (ICAS)

World Education Services (WES)

Step 2: Check the ECA requirements

The requirements for an ECA as a small engine and small equipment repairer may differ depending on the designated organization you choose. You should check the organization’s website to know their specific requirements for your country of education and academic credentials.

Step 3: Gather required documents

Gather all the required documents that the organization requires for your Other small engine and small equipment repairer ECA assessment. These documents include academic transcripts and certificates. Make sure the documents are complete and translated into English or French if they are in another language.

Step 4: Receive the ECA report

Once the assessment is complete, the designated organization will send you an ECA report. The report will confirm the Canadian equivalency of your educational credentials and allow you to make an Express Entry application to immigrate to Canada as a small engine and small equipment repairer.

As a small engine and small equipment repairer Immigrating to Canada you are also required to take a Language test

If you are applying for immigration to Canada as a small engine and small equipment repairer, you need to take an English or French language test to demonstrate your proficiency in either language. Here is a step-by-step guide to getting an English or French language test for Canada immigration:

Step 1: Determine which language test you need

With you occupation of Other small engine and small equipment repairer you will need to determine which language test you need to take, depending on your immigration program and your language proficiency. The most commonly accepted tests for English are the International English Language Testing System (IELTS) and the Canadian English Language Proficiency Index Program (CELPIP). For French, the most commonly accepted test is the Test d’évaluation de français (TEF).

Step 2: Register for the test

Once you have determined which test you need to take, you will need to register for the test with the appropriate testing organization. For IELTS and CELPIP, you can register online on their respective websites. For TEF, you can register online on the website of the Chambre de commerce et d’industrie de Paris (CCIP).

Step 3: Prepare for the test

Before taking the test, it is recommended that you prepare by reviewing the test format and practicing your language skills. Most testing organizations offer study materials and practice tests that you can use to prepare. Obviously by being a professional Other small engine and small equipment repairer you will have a good knowledge of language. However, do treat the language test with respect and do your preparation.

Step 6: Take the test

On the day of the test, arrive at the testing center on time and bring the necessary identification documents with you.

For Canadian immigration as a small engine and small equipment repairer, language proficiency is evaluated on a points based system, where you can earn points based on your results in an approved language test. The Canadian government currently recognizes three language tests for immigration purposes:

• International English Language Testing System (IELTS)

• Canadian English Language Proficiency Index Program (CELPIP)

• Test d’évaluation de français (TEF)

Here’s a breakdown of how many points you can earn in each of the four language skills for each test:

IELTS for Other small engine and small equipment repairers

• Listening: CLB 4-4.5 (6 points), CLB 5 (7 points), CLB 5.5-6 (8 points), CLB 6.5 (9 points), CLB 7-9 (10 points)
• Reading: CLB 4 (6 points), CLB 5 (7 points), CLB 6 (8 points), CLB 7-9 (9 points)
• Writing: CLB 4 (6 points), CLB 5 (7 points), CLB 6 (8 points), CLB 7-9 (9 points)
• Speaking: CLB 4-5 (6 points), CLB 5.5 (7 points), CLB 6-7 (8 points), CLB 7-9 (9 points)

CELPIP for Other small engine and small equipment repairers

• Listening: CLB 4 (4 points), CLB 5 (5 points), CLB 6 (6 points), CLB 7 (7 points), CLB 8-9 (8 points)
• Reading: CLB 4 (4 points), CLB 5 (5 points), CLB 6 (6 points), CLB 7 (7 points), CLB 8-9 (8 points)
• Writing: CLB 4 (4 points), CLB 5 (5 points), CLB 6 (6 points), CLB 7 (7 points), CLB 8-9 (8 points)
• Speaking: CLB 4 (4 points), CLB 5 (5 points), CLB 6 (6 points), CLB 7 (7 points), CLB 8-9 (8 points)

TEF for Other small engine and small equipment repairers

• Compréhension de l’oral (Listening): NCLC 4 (145-180) (CLB 4) (6 points), NCLC 5 (181-216) (CLB 5) (7 points), NCLC 6 (217-248) (CLB 6) (8 points), NCLC 7-9 (249-300) (CLB 7-9) (9 points)
• Compréhension de l’écrit (Reading): NCLC 4 (121-150) (CLB 4) (6 points), NCLC 5 (151-180) (CLB 5) (7 points), NCLC 6 (181-206) (CLB 6) (8 points), NCLC 7-9 (207-249) (CLB 7-9) (9 points)
• Expression écrite (Writing): NCLC 4 (181-225) (CLB 4) (6 points), NCLC 5 (226-270) (CLB 5) (7 points), NCLC 6 (271-309) (CLB 6) (8 points), NCLC 7-9 (310-360) (CLB 7-9) (9 points)
• Expression orale (Speaking): NCL

Express Entry application to Immigrate to Canada as a small engine and small equipment repairer

• Create an online account: Visit the Government of Canada’s immigration website and create an online account. You will need to provide your personal information and create a username and password.

• Complete your profile: Once you have created an account, you can complete your Express Entry profile. This will include information about your occupation as a small engine and small equipment repairer, education, work experience, language ability and other personal details. Make sure to provide accurate information and upload all required documents, such as language test results and work reference letters.

• Calculate your Compreensive Ranking System (CRS) score: Once you have completed your profile, the CRS will automatically calculate your score based on the information you provided. Your CRS score will determine your eligibility for permanent residence as a small engine and small equipment repairer and your ranking in the Express Entry pool. The most up to date CRS Calculator for {pluralocc} is below:

• Submit your profile: Once you have reviewed your profile and confirmed that all information is accurate and up-to-date, you can submit it to the Express Entry pool. You will be given a profile number and an Express Entry Job Seeker validation code which you will need to attach to your Other small engine and small equipment repairer job applications.

• • • Receive an Invitation to Apply (ITA): If you meet the eligibility requirements as a small engine and small equipment repairer for one of the three Express Entry-managed programs (Federal Skilled Worker Program, Federal Skilled Trades Program, Canadian Experience Class), you may be invited to apply for permanent residence. ITAs are issued to Other small engine and small equipment repairer applicants with the highest CRS scores  and are issued during regular Express Entry draws.

• • • Submit your application for permanent residence: If you receive an ITA, you will have 90 days to submit a complete application for permanent residence, including all required forms and documents.

CRS Points Score for a small engine and small equipment repairer Immigrating to Canada in 2023

• • • January 14, 2023 – CRS score cutoff for Other small engine and small equipment repairers: 454
    • October 3, 2022 – CRS score cutoff for Other small engine and small equipment repairers: 422
    • September 1, 2022 – CRS score cutoff for Other small engine and small equipment repairers: 462
    • August 18, 2022 – CRS score cutoff for Other small engine and small equipment repairers: 403
    • August 5, 2022 – CRS score cutoff: 382
    • July 21, 2022 – CRS score cutoff for Other small engine and small equipment repairers: 357
    • July 8, 2022 – CRS score cutoff: 369
    • June 23, 2022 – CRS score cutoff: 357
    • June 10, 2022 – CRS score cutoff: 368
    • May 31, 2022 – CRS score cutoff: 380
    • May 20, 2022 – CRS score cutoff for Other small engine and small equipment repairers: 397

Should you score 400 or over on your Express Entry CRS then there is a very good chance you’ll be able to Migrate to Canada as a small engine and small equipment repairer without a Job Offer or Provincial Nomination.

Jobs in Canada for Other small engine and small equipment repairers

The Job market in Canada for Other small engine and small equipment repairers remains strong and is expected to do so for the next five years. Unemployment for qualified Other small engine and small equipment repairers in Canada is well below average.  An entry-level Other small engine and small equipment repairer with less than 5 years of experience can expect to earn an average Salary of around $64700 whilst a small engine and small equipment repairer with mid-level experience can expect to earn an average total compensation of $104500.

An experienced Other small engine and small equipment repairer with 10 to 20 years of experience can expect to earn an average total compensation of $187887 and a small engine and small equipment repairer with late-career experience can expect to earn an average total compensation of $199877.

Immigrate to Canada as a small engine and small equipment repairer